dpstar heating element is one of the finest in Malaysia.Circulation Heaters also known as “in line heaters” use steel, stainless steel, and titanium flanged immersion heaters in many applications. An electric process circulation heater is used to flow a fluid directly over the heating elements. Lube oil and waste oil applications often use steel for circulation heaters as it is fairly inexpensive compared to stainless steel counterpart. Water circulation heaters are made with stainless steel because of its anti corrosive qualities. Both applications involve using a pump that flows the liquid through a closed pipe circuit (IE. water or glycol solution) that is reheated. A major consideration for this application is viscosity. Heat that is generated by the oil heater allows the liquid to be viscous enough to pass through the circuit of pipes. Circulation heaters come in a range of watt densities that are specifically designed for the medium that is heated. The required wattage to heat the oil or water is highly correlated to the flow rate (in GPM). The oil or water enters through an inlet (the inlet closest to the flange heater) and gets heat applied to it as it flows within a vessel chamber and exits the outlet nozzle (or flange) where it circulates throughout the piping circuit. Insulation is often required for vessels in order to preserve the heat to be applied within the vessel. Efficient heat application can often reduce unnecessary costs through heat loss. Digital thermocouple probes or RTDs, can be used with the electric immersion heater to maintain the oil or water at the preferred temperature. Many applications use liquids with low flash point and, require explosion proof housing (NEMA 7) to avoid potential mishaps.
Why pick us ? We are a leading manufacturer in Malaysia and was established in 1996. Since our inception we have grew to become a top supplier, facilitating our valued clients through our offices located in northern, central and southern part of west Malaysia also our products that we are selling are high quality and certified electrical heaters. Such as Industrial Heaters,Tubular Heater,Ceramic Bobbin Heater,Duct Heater,Cartridge Heater,Finned Tubular Heater,Circulation Heater,Infrared Silica Quartz Heater,Teflon Immersion Heater,Flange Immersion Heater,and etc. Our products are only UL Certified, UKAS,ISO,Standards and etc. Visit us for more outstanding information at http://www.dpstar.com.my