Temperature Controller Overview Explaination


Temperature Controller

A Temperature Controller receives electrical signals input from the Temperature Sensor, compares the electrical signal input to the set point, and outputs adjustment signals to the Controller.
A Controller is used to heat or cool furnaces and tanks using devices such as a solenoid that cuts off electric current to a heater or a fuel valve that shuts off the fuel supply.
Temperature Sensor
The Temperature Sensor consists of an element protected by a pipe. Locate the element, which converts temperatures into electrical signals, in places where temperature control is required.

Temperature Control
The set point is input to operate the Temperature Controller. The time required for stable temperature control varies with the controlled object.Attempting to shorten the response time will usually result in overshooting or hunting the temperature. The response time must not be shortened to reduce overshooting or hunting the temperature.There are applications that require prompt, stable control in the waveform shown in  despite overshooting. There are other applications that require the suppression of overshooting in the waveform shown in  despite the long time required to stabilize the temperature. In other words, the type of temperature control varies with the application and purpose. The waveform shown in is usually considered to be a proper one for standard applications.

dpstar is the leading supplier and manufacturer in Malaysia. We are one of the largest distributor throughout South East Asia. For more inquiry and info about us, don’t hesitate to visit our website.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s