The Most Versatile Top Manufacturer & Suppliers For Tubular Heaters
dpstar is the new popular for form in place tubular heaters and industrial heating solution for a large number of applications. Being one of the largest manufacturer in Malaysia that is capable to custom-formed your tubular heater in a wide range of shapes to correspond to your requirements. dpstar is one of the top leading industrial tubular suppliers company in Malaysia to supply high quality products and services to our valued customers.
For heating almost any liquid or viscous materials including acids, water, synesthetic oils, lube oils as well as air, gases, steam or low melting point solids.
The standard element consists of an 80/20 nickel chrome resistance wire which is connected to terminal pins, and centred in a metal tube. The tube is filled with high quality magnesium oxide and compressed to ensure a rapid heat transfer. The terminal pins from a non-heated section of the element well as the terminal arrangement. They are insulated from the tube by ceramic bushes. Kilowatt rating and voltage can be varied to suit each application.
Our tubular heating element from the basis of all product in this catalogue. They are manufactured from high quality materials in various sheath diameters. They can be supplied straight or bent to customers’ requirement.
Material sheath selection and application:
Heating of fresh water free from chlorine or other aggressive chemicals.
Copper element may nickel plated to provide protection in certain applications. Maximum sheath temperature in water 180oC.
INCOLOY 800 / 840
A nickel chrome alloy used for heating liquids where resistance to stress corrosion is required.
Maximum sheath temperature 850oC.
STAINLESS STEEL 304
Heating gases, where oxidization of corrosion is likely. Selection will depend on the media to be heated and the operating conditions. Maximum sheath temperature 750oC.
STAINLESS STEEL 316
Heating liquids where corrosion is likely. Selection will depend on the media to be heated and the operating conditions. Maximum sheath temperature 750oC.
Heating aggressive liquids where other metal sheated materials do not have the required corrosion resistance.
Selection will depend on the chemical composition of the media to be heated. Maximum sheath temperature 500oC.
dpstar is one of the most technologically advanced solution certified company in Malaysia .For heating almost any liquid or viscous materials including acids, water, synesthetic oils, lube oils as well as air, gases, steam or low melting point solids.Variety of material sheath selection is also available , due to their sheath high quality they are a major seller . For more information please visit our website www.dpstar.com.my.